My patches to kernel 2.6.14-1.1656_FC4, try 1

My patches to kernel 2.6.14-1.1656_FC4, try 1

That is a patch to allow:
DMA Support to Southbridge SiS 965 with driver SiS 5513.
NTFS Read support.
Fix SiS190 Ethernet controller, [sis190].
Make SATA SiS, [sata_sis], part of kernel, instead of a module.

Supported (tested) kernels:
2.6.14-1.1656_FC4

Approach:
Apply all patches that I published, and apply to that situation.

Remarks:
SiS 5513, try 3
SiS 190, try 3

1. Get and install the kernel source that applies:
2.6.14-1.1656_FC4

2. Create the patch files mentioned on the remarks.

3. Create the script to change the defaults values on kernel configuration, called [/usr/src/redhat/SOURCES/make-config.sh]:

#!/bin/bash
# Please note that this script do NOT check if the [.config] was already patched
#
find /usr/src/redhat/SOURCES/ -name "*.config" -print | while read FILE
do
mv ${FILE} ${FILE}.orig
cat ${FILE}.orig | sed -e "s/\(CONFIG_SCSI=\)./\1y/" -e "s/\(CONFIG_SCSI_SATA_SIS=\).*/\1y/" -e "s/\(CONFIG_SIS190=\)./\1m/" -e "s/\(CONFIG_BLK_DEV_SIS5513=\)./\1y/" -e "s/# CONFIG_NTFS_FS is not set/CONFIG_NTFS_FS=m\n# CONFIG_NTFS_DEBUG is not set\n# CONFIG_NTFS_RW is not set\n/" > ${FILE}
done

4. Create the kernel spec patch, called [/usr/src/redhat/SPEC/kernel-2.6.spec.2.6.14.1-1656.patch]:

--- a/kernel-2.6.spec 2006-01-08 12:26:50.000000000 +0100
+++ b/kernel-2.6.spec 2006-01-08 12:30:37.000000000 +0100
@@ -19,7 +19,8 @@ Summary: The Linux kernel (the core of t
%define sublevel 14
%define kversion 2.6.%{sublevel}
%define rpmversion 2.6.%{sublevel}
-%define rhbsys %([ -r /etc/beehive-root -o -n "%{?__beehive_build}" ] && echo || echo .`whoami`)
+#%define rhbsys %([ -r /etc/beehive-root -o -n "%{?__beehive_build}" ] && echo || echo .`whoami`)
+%define rhbsys sis
%define release %(R="$Revision: 1.1656 $"; RR="${R##: }"; echo ${RR%%?})_FC4%{rhbsys}
%define signmodules 0
%define make_target bzImage
@@ -307,6 +308,7 @@ Patch1301: linux-2.6-net-sundance-ip100A
Patch1302: linux-2.6-net-atm-lanai-nodev-rmmod.patch
Patch1303: linux-2.6-net-acenic-use-after-free.patch
Patch1304: linux-2.6-net-sk98lin-vpd.patch
+Patch1305: linux-2.6-sis190.patch

Patch1400: linux-2.6-pcmcia-disable-warning.patch

@@ -348,6 +350,8 @@ Patch1771: linux-2.6-sata-promise-pata-p
Patch1782: linux-2.6-selinux-mls-compat.patch
Patch1783: linux-2.6-usbhid-wacom.patch
Patch1790: linux-2.6-block-reduce-stack.patch
+Patch1795: linux-2.6-pci_ids.patch
+Patch1796: linux-2.6-sis5513.patch

# ACPI patches.
Patch1800: linux-2.6-acpi-enable-ecburst.patch
@@ -728,6 +732,8 @@ cd linux-%{kversion}
%patch1303 -p1
# sk98lin vpd fix
%patch1304 -p1
+# sis190 fix hangup
+%patch1305 -p1

# disable pcmcia warnings
%patch1400 -p1
@@ -803,6 +809,9 @@ cd linux-%{kversion}
%patch1783 -p1
# Decrease stack usage in block layer
%patch1790 -p1
+# Fix DMA on SiS965 southbridge with SiS5513 driver
+%patch1795 -p1
+%patch1796 -p1

# ACPI patches.
# Enable EC burst


5. Execute the script to change kernel defaults:

###
cd /usr/src/redhat/SOURCES/
sh ./make-config.sh
###

6. Apply the kernel spec patch:

###
cd /usr/src/redhat/SPECS/
patch -p1 kernel-2.6.spec.2.6.14.1-1656.patch
###

7. Build the rpms:

###
rpmbuild -bb --target=i686 kernel-2.6.spec
###

Please always address to my hardware, os and kernel patching general procedures before posting a question.